Teac Pikap + Tannoy / 2 Aktif Hoparlör Sistem

2,500.00TL 2,585.00TL


Fiyata KDV Dahildir + Ücretsiz Kargo 

Teknik Bilgiler 

Turntable section  
Drive System Belt Drive
Motor DC Motor
Speed 33 1/3 RPM, 45 RPM
Rotation Speed Variation +/–2%
Wow and Flutters 0.2%
Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF)
60dB or higher (unweighted, 20kHz LPF)
Platter Aluminum Die-cast
Diameter of Platter 12", 30cm
Tonearm section  
Type Static Balance, Straight
Effective Arm Length 8.8", 223mm
Stylus Pressure Range 0 to 5g
Supported Cartridge Weight 3.5 to 6.5g
Anti-skating Adjustment Supported
Cartridge section  
Type MM type
Stylus Shape Elliptical
Stylus Construction Bonded Round Shank
Mount Half inch
Frequency Response 20Hz to 20kHz
Channel Separation 20dB at 1kHz
Channel Balance 2.0dB
Tracking Force 1.5 to 2.5g
Vertical Tracking Angle 20 degrees
Supported Load Impedance 47k ohms
Output Voltage 4.5mV +/–3dB
Stylus Pressure 2.0g +/–0.5g
Cartridge Weight 5.7g +/–0.5g
Head-shell Weight 10g (including Screws, Nuts and Wires)
Replacement Stylus audio-technica ATN95E (sold seperately)
Phono Equalizer Amplifier  
Type of Amplifier MM type (On/Thru switchable)
Analog Output  
Connector RCA Pin jack (Gold-plated)
Output Voltage Phono/Line switchable
Phono Output 4.5mV +/–3dB
Line Output 120mV (–13dBV)
USB Output section  
Connector USB B type
Output Signal PCM 48kHz/16-bit
Supported OS Windows 7, Windows 8, Windows 8.1, Windows 10
OS X Lion(10.7), OS X Mountain Lion(10.8), OS X Mavericks(10.9)
Power AC 100 to 240V, 50/60Hz
Power Consumption 1.5W (less than 0.5W at Standby)
Overall Dimensions
(W x H x D)
16.5" x 4.6" x 14.0"
420 x 117 x 356 mm
Weight  Approx. 10.8 lbs.  4.9 kg
Accessories Rubber Sheet, EP Adapter, Counter Weight,  Head-shell (TEAC MM cartridge), Platter, Dust Cover, Rubber Feet fro Dust Cover x2, Hinge x2, RCA Audio Cable, USB Cable, AC Adapter (GPE053A-120050-Z), Owner's Manual (including Warranty Card)

 

TANNOY REVEAL 402 AKTİF HOPARLÖR - ÇİFT

General

Frequency Response 56 Hz -48 kHz Max SPL 101 dB
Membrane Sizes
HF ¾˝ Soft Dome (19 mm) LF/Mid Range 4” (100 mm)
Bi-amp Output Power, RMS
Power Output 50 Watts LF/Mid Range 25 Watts HF 25 Watts THD < 0.9 %
Input Types and Impedances
Balanced XLR, 20 kOhm Unbalanced ¼" Jack, 10 kOhm AUX Link Mini Jack, 10 kOhm AUX Link Output Mini Jack
EQ Options
HF EQ Settings -1.5 dB HF Cut / Neutral / +1.5 dB HF Boost Crossover Frequency 2.8 kHz Low Frequency Alignment Optimized Front Port
Cabinet Dimensions
HxWxD, inches 9.5 x 5.8 x 8.4 HxWxD, mm 240 x 147 x 212

 

 

 

 

 

Öneriler...